|
Scheduling
Inspections
Automated Building
Inspection Request System (CONNECT)
Monday through Friday - 6:00
a.m. to 7:30 p.m.
Saturday and Sunday - 8:00 a.m. to 5:00 p.m.
Except Scheduled Holidays
(407) 836-2825 -Touch Tone Phones Only
CONNECT is an automated
system that allows callers to use a touch tone telephone to schedule and cancel
inspections.
You cannot request your
inspection on the CONNECT system on the same day the permit is issued. If this is
necessary, please call the regular inspection telephone line at (407)
836-5550.
Instructions For All
CONNECT Functions
- Dial (407) 836-2825 on any touch
tone telephone.
- Select one of the following
options by pressing the number on the telephone keypad.
- Request an inspection
- Speed inspection scheduling
- Cancel an inspection
- Check the status of plans in the
review process
- Request CONNECT
instructions
- End this call
- If you need assistance
- Further instructions for each
process will be given by the system. Listen and follow them precisely.
Note: Always follow
entries with a # (pound) sign when requested. The # key is on the bottom right of the
keypad.
If at any time the
automatic inspection system is inoperable, you may call the regular
inspection telephone line at (407) 836-5550, Monday through Friday,
8:00 a.m. to 5:00 p.m.
To Request an
Inspection
- Call the CONNECT system
and choose option 1 after all options have been listed.
- Enter the nine digit permit
number. Start with the permit prefix letter and end with the # sign.
- Enter the area code if not (407)
and telephone number followed by # sign.
- Enter the three digit inspection
code number for type of inspection, followed by # sign. (See list of codes at the
bottom of this section.)
- Enter the # sign if you would
like the inspection on the next scheduled work date. If you would like to schedule an
inspection for some future date, enter the four digit month and day, followed by the #
sign.
- Listen while CONNECT
repeats your entries back to you. You will be given further instructions by the system.
- Your request will then be
approved and processed. You will be given a seven digit authorization number. Please
remember your authorization number; it is needed to request information or cancel an
inspection. You will be given further instructions.
Canceling an
Inspection
In order to cancel through
CONNECT, you must have requested the inspection through CONNECT.
The cancellation should occur
prior to the day of the scheduled inspection. (However, it may be done the morning of the
scheduled inspection between 7:00 a.m. and 7:30 a.m. by calling the inspector in the
office in order not to incur an additional inspection fee.)
- Enter the nine digit permit
number. Start with the permit prefix letter and end with the # sign.
- Enter the area code, if not
(407), and the telephone number, followed by the # sign.
- Enter the three digit inspection
code number for type of inspection, followed by the # sign.
- Enter the authorization number,
followed by the # sign.
| Inspection Type Codes |
|
Code Building
Inspections |
 |
- 100 Site
- 110 Footing
- 120 Slab
- 121 Sidewalk and Driveway
- 130 Footing/Slab (Mono)
- 150 Lintel
- 160 Tie Beam
- 170 Down pour
- 180 Masonry wall reinforcing
- 188 Window/Door installation
- 189 Sheathing
- 190 Framing
- 191 Fire rated assembly
- 192 Fire wall
- 210 Insulation
- 250 Fences
- 260 Pool Barrier/Safety Devices
- 270 Landscaping final
- 279 Dry-In/Roof flashing
- 280 Roof final
- 290 Final
- 300 Use permit
- 310 Demolition inspection
- 320 Move
- 330 Relocate
- 340 Fire damage
- 350 Pool steel & ground
- 360 Mobile home tie-down
- 370 Tank corrosion &
anchorage
- 380 Tank pressure
- 390 Tank gasoline piping
pressure
|
|
|
Code Gas Inspections |
 |
- 650 Rough - Gas
- 660 Final - Gas
|
|
|
Code Electrical Inspections |
 |
- 400 Temporary service
- 405 Tug inspection
- 410 Underground
- 420 Rough in
- 425 Footer Steel Bonding
- 430 Pool Light/Potting Compound
- 480 Pre Power from Tug
- 490 Final
- 500 Meter reset
- 510 Use inspection
- 520 Change of service
|
|
|
Code Mechanical Inspections |
 |
- 600 Underground
- 610 Rough in
- 690 Final
- 700 Pipe pressure
- 710 Pipe insulation
- 720 Hood/Ventilation
|
|
|
Code Plumbing
Inspections |
 |
- 800 Sewer
- 810 Underground
- 820 Irrigation
- 830 Rough in
- 880 Solar
- 890 Final
|
|
Inspections
For
inspection questions, please contact the chief inspector of the individual
trade. Contact hours are from 7:00 am until 3:30 pm.
- Chief
Building Inspector - Mike
Krenn - (407)836-5581
- Chief
Mechanical Inspector - Gino Price - (407)
836-5557
- Chief
Plumbing Inspector - John
Miles - (407)
836-5559
- Chief
Electrical Inspector
- Ed Fox - (407)
836-5558
Permits Required For Mobile Homes
- Tie Down
- Plumbing, if on private property
with new septic tank
- Electrical
- Mechanical (heating & a/c)
- Separate permit for any addition
to mobile home even if it was existing prior to move.
- 1 Trailer per permit, even if
several are needed on the same construction site.
Additions
/ Inspections
Mobile Home Roof Overs:
lst Inspection--Framing Inspection
2nd Inspection--Final Inspection
Additions - Raised Porches
1st Inspection--Footer
2nd Inspection--Slab
3rd Inspection--Framing
4th Inspection--Final
Note: Aluminum
Contractor responsible for footer and slab construction.
Owner may obtain any required
permit, however, they then accept full responsibility for the fees, work to be performed
and being sure all work is properly inspected by Orange County.
|